COB LED strip lights have rapidly turned into a top pick for current lighting tasks. Unlike standard SMD strips, COB tech offers even, spotless glow, broader light spreads, and greater eye comfort. These traits make COB strips quite favored in building lighting, shop setups, guest areas, and fine home plans.
That said, even the finest COB LED strip might underperform if fitted poorly. From readying the base to sorting power needs, setup details shape light standard, durability, and ongoing steadiness. Backed by long years in making and shipping LED strip fixes around the world, Raymates supplies COB LED items built for strong output as well as simpler, firmer fitting in actual jobs.
This handbook leads you through useful setup advice and hints, and it points out how various Raymates COB LED strip choices suit different job types.
What Are The Best Practices For Preparing COB LED Strip Lights For Installation?
Prior to fixing any COB LED strip, prep work lays the groundwork. Plenty of setup issues stem from hasty or partial starting steps. A solid scheme and right readying cut down on later fixes and hold the glow result steady.
Surface Preparation Essentials
COB LED strips depend a lot on good surface touch. Dirt, grease, or bumpy finishes can cut adhesive hold and lead to strips lifting after a while.
The fix base ought to be spotless, dry, and level. Wipes with alcohol often clear away oil or leftovers. On rough or holey stuff, aluminum tracks come highly advised. They form a firm footing and aid in warmth escape, which counts extra for strong-output COB strips.
Raymates COB LED strips come with uniform rear layers and bendy PCB stuff, so they slide into tracks or snug spots more readily without strain breaks.
Power Supply Matching Guidelines
Picking the proper power unit goes beyond just voltage. Even load spread holds equal weight. COB LED strips pull constant flow over the full strip run. Power units need sizing with at least 20% spare room to dodge overload. Extended lengths also demand care for power fade, particularly in nonstop setups.
Raymates puts out COB LED strips in usual low-power picks like 12V and 24V, which pair neatly with common drivers found globally. Thus, this eases finding spare or extra power parts for builders.
Handling And Safety Considerations
COB LED strips might seem tough, but rough grip can harm the glow coat or inner wiring. Do not curve the strip past its set curve limit. Tight bends close to join spots commonly spark quick breakdowns. At cut times, stick to the shown cut marks to block short paths. Raymates COB strips carry plain cut labels and side markers, which trim down slip-ups in field fitting.
How Do You Choose The Right COB LED Strip Light For Your Project?
Not every COB LED strip fits the same task. Choosing the correct kind aids in easing setup and boosts the end glow impact. Various jobs require varied strip widths, runs, and hue choices.
Super Long COB Strip Benefits
In big jobs, many joins can turn into a bother. Power fade, patchy glow, and added cabling all hike time and expense. Raymates Super Long COB Strip gets made for long stretches with firm glow over far reaches. Hence, it suits halls, shop racks, hotel edge glow, and building lines where smooth flow counts. Fewer join spots also spell lower breakdown chances, a real gain for trade setups that hum for hours daily.
Mini Size COB Strip Advantages
Certain glow plans offer scant space to maneuver. Slim closets, thin frames, and small fittings call for light that slots in without trade-offs. The broader COB LED market was valued at USD 2,697.0 million in 2023 and is projected to grow to USD 7,205.8 million by 2030 at a 15.1% CAGR, driven by demand for uniform, high-quality lighting.
Raymates Mini Size COB Strip has a slimmer board span yet holds the even COB glow yield. It fits nicely for unit glow, case shows, step rims, and fine touches where normal-wide strips seem clunky. Those fitting often note that tinier strips quicken fixing in close quarters and lessen calls for made-to-order tracks.
Colorful COB Strip Use Cases
Hue holds a main part in marking and mood. Fixed white glow fails to fill bold wants at times. Raymates Colorful COB Strip gives uniform hue yield sans clear spots, even in RGB or mixed-hue builds. This proves handy for lounges, fun spots, signs, and highlight walls.
The even hue mix lets these strips tuck away behind spreaders while hitting lively sight punch.
What Are The Key Steps To Mount COB LED Strip Lights Securely?
After picking the apt item, right fixing holds the strip firm and sightly neat through time. A watchful fix process wards off lifting, drooping, or patchy light paths.
Cleaning And Priming The Mounting Surface
Even with firm sticky rear, base quality weighs in. Sleek metal, glass, or done wood bases generally do fine. For bumpy bases, aluminum shapes offer a steady fix lane. They guard the strip from harm and grit too.
Raymates COB LED strips match well with usual aluminum tracks, so they work for both open and tucked fittings.
Adhesive And Mechanical Fixing Methods
Sticky rear suits light and brief runs best. For longer strips or toasty spots, mechanical holds add safety.
Fix clips or track bolts aid in stopping lasting sag. This matters most for roof or upright fittings where pull fights sticky. A blended way often shines: sticky for first spot, clips for lasting back.
Angle And Placement Planning
COB LED strips throw a broad beam, often near 180 degrees. Fix angle sways how light fans over bases. For wall sweep or side glow, setting the strip a bit off the rim yields smoother light run. Checking the spot pre-final fix saves tweak time down the line.
Raymates COB strips yield even light, so they forgive line-up slips more readily.
How Can You Ensure Optimal Electrical Connections For COB LED Strips?
Power links shape lasting output big-time. Slack ties and weak covers spark blink and quick flops. A tidy wire plan boosts fix ease too.
Connector And Soldering Recommendations
COB LED strips link via solder or set plugs. Solder often gives firmer hold for lasting fixes. With plugs, pick kinds made just for COB strips to skip uneven push on the glow coat.
Raymates gives plain side marks and steady pad gaps, which hasten wiring and cut field slip-ups.
Waterproofing And Insulation Techniques
In damp or outside spots, guard stands key. Warm shrink tubes, rubber seal, or wet-proof plugs ward off wet. Wet-proof COB strips need shut end tops post-cut. Overlooking this often breeds rust in time.
Raymates lists COB LED strip picks for varied guard tiers, easing match of item to fix setting.
Power Distribution And Load Balancing
Long fixes should skip one-end power feed. Feeding power from both sides or at gaps holds even glow. This cuts strain on power unit and lines too. Raymates Super Long COB Strip builds back even power schemes, so they hold true for stretched plans.
What Techniques Help In Achieving Professional-Looking COB LED Lighting Results?
Fine points split fair fixes from neat, top-tier glow work. A handful more steps in setup can lift the end sight a bunch.
Seamless Joint And Corner Treatment
Turns often show soft spots in glow plans. Slicing and retying strips with brief leap wires keeps light paths even. Shun cramming strips into tight turns. Soft arcs or plug lines shield the inner build.
Concealing Wires And Drivers
Tucked wiring keeps eyes on the glow alone. Guiding lines behind boards or in tracks yields a neater close. Power units go in reachable but low-key spots for later care.
Testing And Final Adjustment Procedures
Pre-shut tracks or seal fittings, test the setup at full glow always. Check for patchy light, blink, or hue drift. Minor tweaks here dodge pricey mends after. Raymates COB LED strips get plant-checked pre-ship, which trims field debug work.
FAQ
Q1: Can COB LED strips be cut to custom lengths during installation?
A: Yes. COB LED strips can be cut at marked cutting points. Always follow the printed indicators and reseal the ends if the strip is waterproof.
Q2: Are COB LED strips suitable for long continuous lighting runs?
A: Yes. Products like the Raymates Super Long COB Strip are designed specifically for extended runs with stable brightness and fewer connection points.
Q3: Do COB LED strips need aluminum channels for installation?
A: Channels are not always required, but they are highly recommended for better heat handling, cleaner appearance, and long-term stability.
